Shop Edelbrock Performance
store-info
Edelbrock Performance Automotive


Edelbrock Performance Automotive

  Home > Cylinder Heads > AMC >

EDELBROCK PERFORMER RPM CYLINDER HEADS FOR AMC/ JEEP, NO CROSSOVER PORT (COMPLETE, SINGLE) - 60119


EDELBROCK PERFORMER RPM CYLINDER HEADS FOR AMC/ JEEP, NO CROSSOVER PORT (COMPLETE, SINGLE) - 60119


 
Alternative Views:


Our Price: $1,099.50


Product Code: 60119
Qty:

Description
 
EDELBROCK PERFORMER RPM CYLINDER HEADS FOR AMC/ JEEP, NO CROSSOVER PORT (COMPLETE, SINGLE) - 60119

Performer RPM AMC/Jeep (no crossover port)


These cylinder heads are designed as a bolt-on performance upgrade for any 1967-91 AMX, Javelin or Jeep with a 343, 360, 390 or 401 AMC V8 engine. They include adjustable rocker studs and guide plates set-up for use with small-block Ford style adjustable 1.6:1 ratio rockers. The intake flange is dual-drilled to accommodate early and late model intake bolt patterns, covering 1967-91. Complete heads include largerthan- stock valve springs to handle most high-lift cams. They feature stock location ports for compatibility with standard manifolds and headers. A direct bolt-on for 1970 and later engines with 1/2" head bolts, these heads include step-dowel pins for pre-1970 engines. Their dual-quench combustion chambers produce approximately 9.5:1 compression in 401 V8 engines. The 45° intake seat angle offers improved mid- to high-lift flow over the stock 30° angle.

  • Cylinder Head Specifications:
  • Combustion chamber volume: 54cc
  • Intake runner volume: 185cc
  • Exhaust runner volume: 70cc
  • Intake valve diameter: 2.02"
  • Exhaust valve diameter: 1.60"
  • Valve stem diameter: 11/32"
  • Valve guides: Manganese bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: 1.55"
  • Valve spring maximum lift: .580"
  • Rocker stud: 3/8"
  • Guideplate: Hardended steel
  • Pushrod diameter: 5/16"
  • Valve angle: 18°
  • Exhaust port location: Stock
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat

#60119 | #60139: Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench @ 28" H2O
Valve Lift.100".200".300".400".500".600".700"
Intake65130192235258260-
Exhaust5296127163182190-

INSTALLATION NOTE: Match with Edelbrock head gasket sets. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Use Edelbrock Step Washer Kit #9693 on 1967-69 engines with 7/16" head bolts. Deck thickness: 5/8", rocker stud diameter: 3/8", pushrod diameter: 5/16" (width of slot in guide plate).

*Not legal for sale or use on pollution controlled motor vehicles.

Share your knowledge of this product. Be the first to write a review »