Shop Edelbrock Performance
store-info
Edelbrock Performance Automotive


Edelbrock Performance Automotive

  Home > Camshafts > Chevrolet > Small-Block > Performer RPM >

EDELBROCK PERFORMER RPM CAMSHAFT KIT FOR 283-400 V8 (1957-86) S/B CHEVROLET - 7102


EDELBROCK PERFORMER RPM CAMSHAFT KIT FOR 283-400 V8 (1957-86) S/B CHEVROLET - 7102


 
Alternative Views:


Our Price: $245.95


Product Code: 7102
Qty:

Description
 
EDELBROCK PERFORMER RPM CAMSHAFT KIT FOR 283-400 V8 (1957-86) S/B CHEVROLET - 7102

PERFORMER RPM CAMSHAFTS
Designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. In the manifold section you'll find horsepower graphs showing the power levels obtainable when the Performer RPM package is used with the right combination of Edelbrock components. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.

Application Part # Duration
@ 0.50
Int/Exh
Lift
@ Valve
Int/Exh
Lobe Seps. Intake
Center
Line
Idle Vac.
@ 1000
RPM
283-400 V8 (1957-86) 7102 234° / 244° .488" / .510" 112° 107° 11"

*Not legal for sale or use on pollution controlled motor vehicles

Camshaft: Performer RPM

Part #: #7102

Vehicle Type: CHEVROLET

Engine Application: 283-400 V8 (1957-1986)

RPM Range: 1500-6500

DURATION AS ADVERTISEDINTAKE: 308°EXHAUST: 318°
DURATION @ .050INTAKE: 234°EXHAUST: 244°
LIFT @ CAM (Lobe)INTAKE: 0.325"EXHAUST: 0.34"
LIFT @ VALVEINTAKE: 0.488"EXHAUST: 0.51"
LOBE SEPERATION: 112°INTAKE CENTERLINE: 107°IDLE VAC @ 1000 RPM: 11"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT:Opens: 10° BTDC
Closes: 44° ABDC
EXHAUST TIMING @ .050" LIFT:Opens: 59° BBDC
Closes: 5° ATDC
OPTIONAL VALVE SPRINGS: #5703
CAM FEATURES: 410 HP & 408 ft.-lbs. with #7501 intake & #60899 heads.
INSTALLATION NOTES: Use Edelbrock Performer-Link Timing Chain and Gear Set #7800 or Accu-Drive gear drive #7890. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection. Use "0" position for most applications.
Footnote 1: Do not use dual valve springs .Use only recommended Edelbrock Sure Seat Valve Springs #5703.
Footnote 2: Use stock ratio rocker arms only.

Share your knowledge of this product. Be the first to write a review »