Shop Edelbrock Performance
store-info
Edelbrock Performance Automotive


Edelbrock Performance Automotive
Home > Superchargers > Enforcer > Small-Block Chevy > EFI Supercharger Systems

EFI SUPERCHARGER SYSTEMS

These systems are setup for electronic fuel injected applications and feature a throttle body flange that will accept dual throttle bodies with 4150-style bolt pattern. These E-Force Supercharger systems also include a high capacity air to water intercooler with a bar and plate design and will require a low temp radiator (sold separately) to cool the incoming intake charge. Complete kit includes throttle bodies, Pro-Flo 2 ECU, wiring harness, fuel rails, injectors, gaskets and hardware.
Sort By:
1
EDELBROCK E-FORCE RPM EFI SUPERCHARGER SYSTEM FOR 1986-EARLIER CHEVY CYLINDER HEADS BASE SUPERCHARGER SYSTEM (EXCLUDES THROTTLE BODIES, ELECTRONICS, HARNESS & INJECTORS) SATIN FINISH - 1520
EDELBROCK E-FORCE RPM EFI SUPERCHARGER SYSTEM FOR 1986-EARLIER CHEVY CYLINDER HEADS BASE SUPERCHARGER SYSTEM (EXCLUDES THROTTLE BODIES, ELECTRONICS, HARNESS & INJECTORS) SATIN FINISH - 1520
These systems are setup for electronic fuel injected applications and feature a throttle body flange that will accept dual throttle bodies with 4150-style bolt pattern. These E-Force RPM Supercharger systems also include a high capacity air to water intercooler system with a bar and plate intercooler and low temp radiator (sold separately) to cool the incoming intake charge.

Installation Notes: Carb pad height: 11.73" (measured from the end seal surface), carb height: 2.66".


EDELBROCK E-FORCE RPM EFI SUPERCHARGER SYSTEM FOR 1986-EARLIER CHEVY CYLINDER HEADS BASE SUPERCHARGER SYSTEM (EXCLUDES THROTTLE BODIES, ELECTRONICS, HARNESS & INJECTORS) POLISHED FINISH - 15201
EDELBROCK E-FORCE RPM EFI SUPERCHARGER SYSTEM FOR 1986-EARLIER CHEVY CYLINDER HEADS BASE SUPERCHARGER SYSTEM (EXCLUDES THROTTLE BODIES, ELECTRONICS, HARNESS & INJECTORS) POLISHED FINISH - 15201
These systems are setup for electronic fuel injected applications and feature a throttle body flange that will accept dual throttle bodies with 4150-style bolt pattern. These E-Force RPM Supercharger systems also include a high capacity air to water intercooler system with a bar and plate intercooler and low temp radiator (sold separately) to cool the incoming intake charge.

Installation Notes: Carb pad height: 11.73" (measured from the end seal surface), carb height: 2.66".


EDELBROCK E-FORCE RPM EFI SUPERCHARGER SYSTEM FOR EDELBROCK E-TEC OR VORTEC-STYLE CYLINDER HEADS BASE SUPERCHARGER SYSTEM (EXCLUDES THROTTLE BODIES, ELECTRONICS, HARNESS & INJECTORS) SATIN FINISH - 1522
EDELBROCK E-FORCE RPM EFI SUPERCHARGER SYSTEM FOR EDELBROCK E-TEC OR VORTEC-STYLE CYLINDER HEADS BASE SUPERCHARGER SYSTEM (EXCLUDES THROTTLE BODIES, ELECTRONICS, HARNESS & INJECTORS) SATIN FINISH - 1522
These systems are setup for electronic fuel injected applications and feature a throttle body flange that will accept dual throttle bodies with 4150-style bolt pattern. These E-Force RPM Supercharger systems also include a high capacity air to water intercooler system with a bar and plate intercooler and low temp radiator (sold separately) to cool the incoming intake charge.

Installation Notes: Carb pad height: 11.73" (measured from the end seal surface), carb height: 2.66".

EDELBROCK E-FORCE RPM EFI SUPERCHARGER SYSTEM FOR EDELBROCK E-TEC OR VORTEC-STYLE CYLINDER HEADS BASE SUPERCHARGER SYSTEM (EXCLUDES THROTTLE BODIES, ELECTRONICS, HARNESS & INJECTORS) POLISHED FINISH - 15221
EDELBROCK E-FORCE RPM EFI SUPERCHARGER SYSTEM FOR EDELBROCK E-TEC OR VORTEC-STYLE CYLINDER HEADS BASE SUPERCHARGER SYSTEM (EXCLUDES THROTTLE BODIES, ELECTRONICS, HARNESS & INJECTORS) POLISHED FINISH - 15221
These systems are setup for electronic fuel injected applications and feature a throttle body flange that will accept dual throttle bodies with 4150-style bolt pattern. These E-Force RPM Supercharger systems also include a high capacity air to water intercooler system with a bar and plate intercooler and low temp radiator (sold separately) to cool the incoming intake charge.

Installation Notes: Carb pad height: 11.73" (measured from the end seal surface), carb height: 2.66".

   
 
1