Shop Edelbrock Performance
store-info
Edelbrock Performance Automotive


Edelbrock Performance Automotive
Home > Intake Manifolds > Chevrolet > Small-Block 23° > Super Victor 23° (3500-8000 RPM) > Small-Block with Standard Port Heads
SUPER VICTOR 23° FOR SMALL-BLOCK WITH STANDARD PORT HEADS
Sort By:
1
EDELBROCK SUPER VICTOR RACING MANIFOLD FOR 262-400 S/B CHEVY V8 - 2925
Our Price: $341.95
more info
EDELBROCK SUPER VICTOR RACING MANIFOLD FOR 262-400 S/B CHEVY V8  - 2925
The #2925 is a high performance feature packed small-block racing manifold for standard port location 23-degree cylinder heads. A taller profile with extra long runners that extend into the plenum offers increased volume. The cross-sectional area of the runners are tuned to complement the runner length creating substantial torque increases at 4500-5500 rpm. The #2925 also has many features that will be appreciated by the serious engine builder, including: Slotted flange bolt holes to allow mating on decked blocks or milled heads. Rear water outlets allow custom cooling system routing. The flange above the intake ports is machined flat to provide a straight-line reference for port-matching layout.

Installation Notes: Recommended intake gasket: Edelbrock #7201.

Carburetor Recommendation: Use appropriate standard flange square-bore racing Carburetor.


EDELBROCK SUPER VICTOR RACING MANIFOLD FOR 262-400 S/B CHEVY V8- ENDURASHINE FINISH - 29254
Our Price: $498.95
more info
EDELBROCK SUPER VICTOR RACING MANIFOLD FOR 262-400 S/B CHEVY V8- ENDURASHINE FINISH  - 29254
The #2925 is a high performance feature packed small-block racing manifold for standard port location 23-degree cylinder heads. A taller profile with extra long runners that extend into the plenum offers increased volume. The cross-sectional area of the runners are tuned to complement the runner length creating substantial torque increases at 4500-5500 rpm. The #2925 also has many features that will be appreciated by the serious engine builder, including: Slotted flange bolt holes to allow mating on decked blocks or milled heads. Rear water outlets allow custom cooling system routing. The flange above the intake ports is machined flat to provide a straight-line reference for port-matching layout.

Installation Notes: Recommended intake gasket: Edelbrock #7201.

Carburetor Recommendation: Use appropriate standard flange square-bore racing Carburetor.
EDELBROCK SUPER VICTOR RACING MANIFOLD WITH PRE-ASSEMBLED DIRECT PORT NITROUS SYSTEM FOR 262-400 S/B CHEVY V8 - 72925
Our Price: $2,159.95
more info
EDELBROCK SUPER VICTOR RACING MANIFOLD WITH PRE-ASSEMBLED DIRECT PORT NITROUS SYSTEM FOR 262-400 S/B CHEVY V8  - 72925
The #2925 is a high performance feature packed small-block racing manifold for standard port location 23-degree cylinder heads. A taller profile with extra long runners that extend into the plenum offers increased volume. The cross-sectional area of the runners are tuned to complement the runner length creating substantial torque increases at 4500-5500 rpm. The #2925 also has many features that will be appreciated by the serious engine builder, including: Slotted flange bolt holes to allow mating on decked blocks or milled heads. Rear water outlets allow custom cooling system routing. The flange above the intake ports is machined flat to provide a straight-line reference for port-matching layout. A boss for a distributor clamp has been added on the left side, for easier to access when timing an engine. The #72925 features a pre-assembled ready to bolt-on direct port nitrous system out-of-the-box!


Installation Notes: Recommended intake gasket: Edelbrock #7201.

Carburetor Recommendation: Use appropriate standard flange square-bore racing Carburetor.


   
 
1