 |
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft
selection. They are compatible with OEM or Edelbrock hydraulic roller
tappets which reduce friction, virtually eliminate break-in problems,
and permit higher valve velocities for increased performance.
PERFORMER-PLUS CAMSHAFTS
Designed for optimum torque from the low-end to the mid-range,
Performer-Plus camshafts match with Performer manifolds for vehicles
operating from off-idle to 5500 rpm. They are smooth idling cams for
daily drivers, trucks, vans, RVs and 4x4s. You can expect a major
improvement in throttle response and torque.
|
|
PERFORMER RPM CAMSHAFTS
Designed for street high-performance applications, Performer RPM
cams provide power from 1500 to 6500 rpm. These hydraulic lifter
camshafts are dyno-matched to Performer RPM manifolds for high-rpm
horsepower while still maintaining acceptable low-end torque. With 10 to
12 inches of manifold vacuum at idle, Performer RPM cams have more lift
and duration than most street camshafts.
|
|
TORKER CAMSHAFT & LIFTERS
Designed to work with Torker II manifolds for performance from
2500 to 6500 rpm, these camshafts are ideal for high-performance street,
drag or marine applications. Torker-Plus cams have a slightly rough
idle and are not suitable for trucks or towing applications. Hydraulic
flat tappet lifters are included with each camshaft.
|
|
ROLLIN' THUNDER CAMSHAFTS
Edelbrock Rollin' Thunder camshafts are designed to improve
horsepower and torque, produce a great sounding performance idle and
provide excellent vacuum at idle to support power accessories. Rollin'
Thunder camshafts feature more aggressive lift profiles than possible
with conventional flat-tappet hydraulic cams, without excessive valve
overlap that can compromise low rpm drivability.
|
|
|
|
|
